Cement should be selected and used better

After purchasing cement, it does not mean that it has been completed! Experts specially remind consumers to correctly select qualified cement and cooperate with the correct use method at the same time. In this regard, experts put forward the following suggestions: first, we should pay attention to the reasonable proportion of mortar. For example, according to the use of the Department

after the completion of the purchase of cement, it does not mean that it has been completed! Experts specially remind consumers to correctly select qualified cement and cooperate with the correct use method at the same time

in this regard, experts put forward the following suggestions:

first, pay attention to the reasonable proportion of mortar. For example, the appropriate mortar proportion should be selected according to the parts used, such as plastering, floor tiles, wall tiles, etc. the mortar mixed each time should be used in two hours

II. Select the sand for mortar specially used in the building materials market, especially control the mud content of the sand quality. High mud content will reduce the bonding degree

III. tiles should be fully soaked before use (more than two hours) and dried in the shade to avoid mortar strength reduction due to water loss; Floor tiles should be paved dry and wall tiles should be paved wet

IV. the mortar should be mixed evenly. It is recommended to use it within 2 hours and 30 minutes after mixing the mortar

through the introduction of experts, we found that as long as we master the correct method, select and use cement well, it is not difficult. With the advice of experts, I believe that more consumers will polish their eyes when decorating, and really buy high-quality and high-performance cement products, making the warm home environment more solid, safer, more environmentally friendly and healthier

昆明皮肤病医院

北京儿科医院

杭州骨科医院